Our Whitianga office will be closed to the public on Friday 26 April. Our staff are still working and can be contacted via our freephone 0800 800 401.

Close alert

Guidance for analysis of soil contamination using a portable X-Ray Fluorescence spectrometer

TR 2016/22
  1. Services »
  2. Publications »
  3. TR2016/22

Report: TR 2016/22

Author: Pattle Delamore Partners Ltd

About this report

This report provides a literature review and recommended procedures for the use of portable X-ray fluorescence measurements of trace elements in soils; primarily during contaminated land investigations.

It is not intended to be a training manual or standard upon which all field-based XRF work should be compared to; rather it is a guide to help the reader understand the limitations and appropriate usage of the method based on current international best practice.  

The advantages of portable XRF include real-time, low-cost results with minimal sample preparation; but disadvantages include low accuracy, higher detection limits, limited scope of contaminants and interference.  To date, research and practice indicate that portable XRF results are semi-quantitative; and this report recommends that the method is best applied in combination with laboratory analysis to enhance decision-making for contaminated land investigations and remediation. 

Read or download the report

Guidance for analysis of soil contamination using a portable X-Ray Fluorescence spectrometer [PDF, 3.3 MB]

Contents
  Executive summary ii
1.0 Introduction 1
1.1 Acknowledgements 1
2.0 The place of field portable x-ray fluorescence in contaminated site investigations 2
2.1 Advantages and disadvantages 2
2.2 Use of field portable XRF 4
2.3 FP-XRF sampling strategies 7
3.0 Elements suitable for XRF analysis 9
3.1 Factors which influence limits of detection 9
4.0 Factors affecting XRF analysis accuracy 11
4.1 Interferences and sources of error 11
5.0 XRF safety considerations 15
6.0 Sample analysis procedures 15
6.1 On-site analysis 15
6.2 Quality assurance/quality control 20
7.0 Data analysis and interpretation 24
8.0 Reporting on results 25
9.0 References 26
  Glossary - a guide to common x-ray fluorescence terms 30